Leaked 4.4 At&t Galaxy Note 3

View previous topic View next topic Go down

Leaked 4.4 At&t Galaxy Note 3

Post by vitha on Thu Jan 23, 2014 8:49 am

!!! WARNING !!! These both contain bootloaders!
THERE IS NO KNOWN ROOT YET. YOU WILL NOT BE ABLE TO GO BACK TO 4.3 [size=24]
Also deletes everything on your phone .... BACK UP

If you don't know what these are, or how to use them, or want to keep root, I would suggest you wait until someone confirms a flashing method that retains root or builds a custom rom.

N900AUCECMLG_OneClickBin.zip (N900AUCECMLG_OneClickBin.exe)
Download: http://www.androidfilehost.com/?fid=23321874045862490
MD5: B2BA36D086285DC5C0BCC7FB084D24A4
SIZE: 1.5GB

N900AUCECMLG.zip <---- extract info for exe most will not use...
Download: http://www.androidfilehost.com/?fid=23321874045862491
MD5: E92AF038F5259EFA1BEAE0613FC8C614
SIZE: 1.5GB

How To Install N900AUCECMLG Android 4.4.2 KitKat Using OneClick Executable
1.Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
2.Now, put the AT&T Galaxy Note 3 SM-N900A in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
3.Extract downloaded N900AUCECMLG_OneClickBin.zip and then run (double click) N900AUCECMLG_OneClickBin.exe that located within extracted folder.
4.Connect your phone to computer.
5.Follow onscreen instruction and wait patiently when installation process start.
6.Once done, your phone will reboot automatically.

How To Install N900AUCECMLG Android 4.4.2 KitKat On AT&T Galaxy Note 3 SM-N900A Manually
1.Download Odin v3.09.
2.Extract Firmware zip (N900AUCECMLG.zip) file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
3.Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
4.Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
5.Now, put the AT&T Galaxy Note 3 SM-N900A in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
6.Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
7.Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
8.Now add following files as instructed below. You can find all this files under your extracted firmware folder. 1.Add file with AP prefix to AP
2.Add file with BL prefix to BL
3.Add file with CP prefix to CP
4.Add file with CSC prefix to CSC

9.In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
10.Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
11.Once flashing completed, your AT&T Galaxy Note 3 SM-N900A will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Congrats! You just updated your AT&T Galaxy Note 3 SM-N900A to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On AT&T Galaxy Note 3 SM-N900A

If AT&T Galaxy Note 3 SM-N900A stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
1.Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
2.Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.

Please note, performing wiping task will erase your device internal memory data and not external SD card data.

CODE#

build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=KOT49H.N900AUCUCMLG
ro.build.version.incremental=N900AUCUCMLG
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Sat Jan  4 19:10:49 KST 2014
ro.build.date.utc=1388830249
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDC3313
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SM-N900A
ro.product.brand=samsung
ro.product.name=hlteuc
ro.product.device=hlteatt
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=hlteatt
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=hlteuc-user 4.4.2 KOT49H N900AUCUCMLG release-keys
ro.build.fingerprint=samsung/hlteuc/hlteatt:4.4.2/KOT49H/N900AUCUCMLG:user/release-keys
ro.build.characteristics=att
# Samsung Specific Properties
ro.build.PDA=N900AUCUCMLG
ro.build.hidden_ver=N900AUCUCMLG
ro.build.changelist=257432
ro.product_ship=true
ro.chipname=MSM8974
ro.build.knox.container=
# end build properties
#
# from device/samsung/hlteatt/system.prop
#
#
# system.prop for msm8974
#

ro.sf.lcd_density=480

rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1

# For sys info indication
persist.radio.add_power_save=1

debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.disable.bwc=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false

ro.hdmi.enable=true
tunnel.decode=true
tunnel.audiovideo.decode=true
lpa.decode=false
lpa.use-stagefright=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=0

#system props for the MM modules

media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491

# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true

#system props for time-services
persist.timed.enable=true

#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608

# System property for cabl
ro.qualcomm.cabl=1

#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0

#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true

#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true

ro.qc.sdk.sensors.gestures=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true

#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4

#SLook
ro.slook.ver=1

#
# ADDITIONAL_BUILD_PROPERTIES
#
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.build.scafe=americano
ro.build.scafe.size=short
ro.build.scafe.shot=double
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.securestorage.support=true
security.mdpp=None
ro.security.mdpp.ver=1.0
ro.security.mdpp.release=1
security.mdpp.result=None
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.path_cache_size=8
ro.hwui.shape_cache_size=2
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=4
ro.hwui.texture_cache_flush_rate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.error.receiver.default=com.samsung.receiver.error
ro.config.alarm_alert=Alarm_Morning_flower.ogg
ro.config.ringtone=ATT_Firefly_Default.ogg
ro.config.notification_sound=Whisper.ogg
ro.security.mdpp.ux=Enabled
ro.setupwizard.mode=OPTIONAL
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.gmsversion=4.4.2_r1
persist.sys.dalvik.vm.lib=libdvm.so
ro.build.selinux=1
ro.kernel.qemu=0
ro.config.tima=1
ro.config.knox=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: Leaked 4.4 At&t Galaxy Note 3

Post by vitha on Fri Jan 24, 2014 7:33 pm

I took the jump to 4.4 on my note 3. It stilled stayed custom over locked to AT&T. No root yet so I used helium and install app from the backup apks of titanium backup. I see GPS has improved and signal seems to be a little better. Other than that I do not see any differences over 4.3. No crashes or force close, and nothing bad at all that I can see. Hope a root will be coming soon....
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum