PIPO M9 Max Kit Kat 4.4 stable

Page 3 of 6 Previous  1, 2, 3, 4, 5, 6  Next

View previous topic View next topic Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by cabanak on Tue Feb 25, 2014 11:14 am

Coool

I installed it yesterday without problem, but I didn't have enough time for testing.
But first impression is good. I didn't catch any problem, everything is smooth. sunny

I am going to try Gravity Box KK today.

Thanks

cabanak
New Member
New Member

Posts : 3
Join date : 2014-02-23
Location : Slovakia

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by nfccristo on Tue Feb 25, 2014 11:40 am

Could not mount the sd card (Storage tablet) in Part 10 of the tuturial KITKAT ROM, but with an SD card now works. I do not quite understand the tuturial, but I have now successfully installed.

I will now try the Gravity Box KK.
Anyway, Thanks for the replies

nfccristo
New Member
New Member

Posts : 3
Join date : 2014-02-21

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Wed Feb 26, 2014 3:25 pm

Yes, you are to run it from the external mini SD card (TF) you will not be to write to the internal SD till it is formatted.
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by hipola on Wed Feb 26, 2014 4:55 pm

The rom works perfectly!

Thank you vitha and spectra for the help;)

hipola
New Member
New Member

Posts : 4
Join date : 2014-02-23

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by 1bcc on Thu Feb 27, 2014 12:32 am

Vitha,
I see where you updated the ROM to 2.2, but when I install "about tablet" still says 2.0-14.01.2014. Any ideas what I'm doing wrong?

1bcc
New Member
New Member

Posts : 1
Join date : 2014-02-21

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Thu Feb 27, 2014 8:48 am

yes I did not change any information in the rom its self, it was just importing the script changes and a few files. I was in a rush and totally forgot to update that information for identifying update changes. Next time I will make sure to update that, my bad.
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by ardes elix on Thu Feb 27, 2014 11:03 am

i'm stressing out big time;
erased ok, run ok, cwm boot ok. moving up-down in cwm proved to be extra tricky. finally managed to enter nand flash. and now i'm stuck - no way i can press the NEXT button.
since no one seems to be facing that kind of a problem, i must have done something really wrong.
any help would be immensely appreciated!

ardes elix
Member
Member

Posts : 6
Join date : 2014-02-26

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Thu Feb 27, 2014 11:08 am

use the power button like enter. "Remember your never stuck, because you can always reflash or reflash your old rom."

I like to mention not all tablets are created equal! I have seen stuff happen and on duplicate tab not happen....
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by ardes elix on Thu Feb 27, 2014 11:30 am

yes, only the power and esc buttons work but when i press either of them, only the "about - quit - back" options appear.

ardes elix
Member
Member

Posts : 6
Join date : 2014-02-26

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Thu Feb 27, 2014 11:32 am

have you tried to reflash it? I think of anything else I will post...
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by ardes elix on Thu Feb 27, 2014 11:41 am

i went out and bought an external keyboard and it worked.
now, there's a new problem; i can't use the touch screen anymore - no reaction!

ardes elix
Member
Member

Posts : 6
Join date : 2014-02-26

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Thu Feb 27, 2014 11:43 am

either one or the other works not togeather. mine I have to reboot each time I change from usb keyboard to touch. If you have a blue tooth keyboard it will work both at same time, however does not work outside of android OS
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by ardes elix on Thu Feb 27, 2014 11:54 am

i fear that the touch panel is damaged from the inside during the flashing procedure.

ardes elix
Member
Member

Posts : 6
Join date : 2014-02-26

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Thu Feb 27, 2014 12:07 pm

I am not aware of anyway to damage the panel by flashing. The only reason it would not work would be drivers not compatible or corrupted. I would reflash you tablet. You can just reflash kernel to see if that works. You can flash kernels anytime.
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by ardes elix on Thu Feb 27, 2014 12:48 pm

reflashed with same results.
went back to riley2.4 >> everything back to normal
i will experiment with kernels later, now that my heart is back in place.
thanks for your help.

ardes elix
Member
Member

Posts : 6
Join date : 2014-02-26

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Thu Feb 27, 2014 12:53 pm

well that is good, I am glad. What version of Pip M9 Max do you have? V1 or is it newer like V3 or V5. Try the same kernel that your using with riley2.4
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by ardes elix on Fri Feb 28, 2014 6:34 am

I'm not 100% sure, I think it's v3.

ardes elix
Member
Member

Posts : 6
Join date : 2014-02-26

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Fri Feb 28, 2014 8:27 am

Hmmm maybe you had a bad down load then. the default and OC work great on V3.
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by tivac on Sat Mar 01, 2014 6:27 pm

which kernel can we flash to get 1.8 ghz cpu like riley rom

tivac
Member
Member

Posts : 5
Join date : 2014-02-27

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Sat Mar 01, 2014 7:35 pm

you can use ockernel it is 1.8 that is in the folder
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by tivac on Sun Mar 02, 2014 1:28 am

Already flashed but cpuz still showing 1.6

tivac
Member
Member

Posts : 5
Join date : 2014-02-27

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Sun Mar 02, 2014 3:26 am

well not sure what to tell you. the ockernel works at 1.8 here and many more. either something did not flash right, or your cpu not wanting to go over 1.6. try the over clock you had on pervious rom
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by tivac on Sun Mar 02, 2014 5:12 am

Can you give link for 1.8 kernel

tivac
Member
Member

Posts : 5
Join date : 2014-02-27

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by tivac on Sun Mar 02, 2014 5:12 am

Can you give link for 1.8 kernel

tivac
Member
Member

Posts : 5
Join date : 2014-02-27

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by vitha on Sun Mar 02, 2014 11:12 am

it is in the download. however here is just it alone : oc kernel download
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: PIPO M9 Max Kit Kat 4.4 stable

Post by Sponsored content


Sponsored content


Back to top Go down

Page 3 of 6 Previous  1, 2, 3, 4, 5, 6  Next

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum