M9 20130608_en_No3G#79 rooted/bloat
3 posters
Page 1 of 1
M9 20130608_en_No3G#79 rooted/bloat
This Rom is based off the stock Pipo M9 English version 2 no 3G firmware Build date 06/08/2013
The stock rom has not been officially released. This rom has been rooted, tweaks to the build.prop, Incl. to enable option to add users. multi users feature (You should see the option Top Right)
You will flash it like any other img
Download 06082013 custom rom here
Requirements:
1.Rockchip Batch Tool v1.6 Rock Chip Batch Tool 1.6
2.Custom Firmware Download firmware here
3.Windows PC
4.USB Cable
2. Initial setup
1.Extract the Batch Tool (RBT in the following) package. It includes the needed drivers too!
2.Extract the downloaded firmware image
3.Run RBT, and browse the image file in
4.If everything done right, you should see some info printed in the fields, like the current version of the firmware, Android, the board (RK30), etc
3. Installing device drivers
1.Press ESC key for a few seconds and then press reset at same time.
2.As Windows notices the new device, release the back button.
3.When asked for drivers, browse to the extracted RBT directory, select the directory "Drivers", and let Windows install the matching ones (if like on my computer Windows 8 64bit, I had to go to control panel then Devices and printers. You will see your unknown device and manually install drivers)
4.When finished, you should see one of the fields in RBT turn green from grey
4. Installing the new firmware
1.After plugging in the tablet, and the green field pops up on the bottom, press the "RESTORE" button
2.You should see the text Download firmware start. (this will format the whole nan, so backup your stuff before you do this)
3.If everything done right, you should see a message like this:
4.**********Upgrade Done Success<1> Fail<0> Timems**********
5.If it finished without a problem, the tablet should boot up immediately. And your see a restore and wait for restore to finish. Now it will boot up like normal. If not, just press the power button, and wait until it boots.
The stock rom has not been officially released. This rom has been rooted, tweaks to the build.prop, Incl. to enable option to add users. multi users feature (You should see the option Top Right)
You will flash it like any other img
Download 06082013 custom rom here
Requirements:
1.Rockchip Batch Tool v1.6 Rock Chip Batch Tool 1.6
2.Custom Firmware Download firmware here
3.Windows PC
4.USB Cable
2. Initial setup
1.Extract the Batch Tool (RBT in the following) package. It includes the needed drivers too!
2.Extract the downloaded firmware image
3.Run RBT, and browse the image file in
4.If everything done right, you should see some info printed in the fields, like the current version of the firmware, Android, the board (RK30), etc
3. Installing device drivers
1.Press ESC key for a few seconds and then press reset at same time.
2.As Windows notices the new device, release the back button.
3.When asked for drivers, browse to the extracted RBT directory, select the directory "Drivers", and let Windows install the matching ones (if like on my computer Windows 8 64bit, I had to go to control panel then Devices and printers. You will see your unknown device and manually install drivers)
4.When finished, you should see one of the fields in RBT turn green from grey
4. Installing the new firmware
1.After plugging in the tablet, and the green field pops up on the bottom, press the "RESTORE" button
2.You should see the text Download firmware start. (this will format the whole nan, so backup your stuff before you do this)
3.If everything done right, you should see a message like this:
4.**********Upgrade Done Success<1> Fail<0> Timems**********
5.If it finished without a problem, the tablet should boot up immediately. And your see a restore and wait for restore to finish. Now it will boot up like normal. If not, just press the power button, and wait until it boots.
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: M9 20130608_en_No3G#79 rooted/bloat
Is this one better than riley rom
worrior000- Member
- Posts : 11
Join date : 2013-08-02
Age : 35
Location : egypt
Re: M9 20130608_en_No3G#79 rooted/bloat
http://m.youtube.com/watch?v=YDDkrdf_El0&desktop_uri=%2Fwatch%3Fv%3DYDDkrdf_El0. Can u get this ROM for me and thank you
worrior000- Member
- Posts : 11
Join date : 2013-08-02
Age : 35
Location : egypt
Re: M9 20130608_en_No3G#79 rooted/bloat
this is the same thing other then they are using widgets. it is same rom and same tablet. this is that rom https://vitha.forumotion.com/t140-m93188-42-pipo-sdk20. if you want that rom with rooted use this one https://vitha.forumotion.com/t141-pipo-m9-422-rileyrom-17-with-sdk-20
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
worrior000- Member
- Posts : 11
Join date : 2013-08-02
Age : 35
Location : egypt
Re: M9 20130608_en_No3G#79 rooted/bloat
Hi
Excellent and thank you soo much, have been waiting for this.
I do have a couple questions though if you dont mind.
1. what do you mean you talk about mult user and say (you should seethe option top right) - Ok i think ive just worked it out, do you mean its included and once u set up multiple users i will see it in the top right of the lock screen?
2.how much space is set for user apps, as i have seen on some roms the option to have 2 or 4 or 6 and so on, and is that option available in this rom?
3.I see you say its rooted, is it debloated too, as u have just wrote bloat, im not sure
many thanks in advance
Excellent and thank you soo much, have been waiting for this.
I do have a couple questions though if you dont mind.
1. what do you mean you talk about mult user and say (you should seethe option top right) - Ok i think ive just worked it out, do you mean its included and once u set up multiple users i will see it in the top right of the lock screen?
2.how much space is set for user apps, as i have seen on some roms the option to have 2 or 4 or 6 and so on, and is that option available in this rom?
3.I see you say its rooted, is it debloated too, as u have just wrote bloat, im not sure
many thanks in advance
ess2k- New Member
- Posts : 3
Join date : 2013-07-31
Re: M9 20130608_en_No3G#79 rooted/bloat
Yes you figured it out about multi user. The setup is 2gb yes it is debloated too...
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Similar topics
» PIPO M2 3G rooted rom
» Pipo M9 Max 10/25/2013 Rooted OC
» PIPO M9 4.2.2 3G stock rom none rooted
» Install Pre-Rooted Debloated stock rom
» Stock Rooted 4.4 - KRT16O - De-Odex
» Pipo M9 Max 10/25/2013 Rooted OC
» PIPO M9 4.2.2 3G stock rom none rooted
» Install Pre-Rooted Debloated stock rom
» Stock Rooted 4.4 - KRT16O - De-Odex
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|