SGH-I747 back to Original Factory Stock Firmware
2 posters
Think Out of the Box with Vitha.Us ... Customising and Modding :: Android :: Rom's :: Galaxy S3 i747
Page 1 of 1
SGH-I747 back to Original Factory Stock Firmware
How to Install/Return Back Samsung Galaxy S3 AT&T SGH-I747 Original Factory Stock Firmware
Step 1: Download the needed tools for flashing
Odin Flasher Tool – Odin3_v3.07
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Samsung Galaxy S3 USB Driver – download (only needed if you haven’t installed the latest Kies on your PC)
http://hotfile.com/dl/167901090/60e906d/ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0.exe.html
Grab one of these Samsung Galaxy S3 SGH-I747 Original Stock ROM (or you can check out any latest releases if somehow not included here since there will coming more updates in the future)
Warning! This should not be used on the international version Samsung Galaxy SIII GT-I9300 variants for it may result to unwanted bricks! This works exclusively for U.S SGH-I747 only.
Stock ROM/Firmware ICS build: UCALG1
PDA: I747UCALG1
CSC: I747ATTALG1
MODEM: I747UCLG1
Released Date: July 2012
Stock ROM Download: http://hotfile.com/dl/165022848/0305b1a/SGH-I747_ATT_ICS_4.0.4_I747UCALG1_I747ATTALG1_Original.zip.html
Stock ROM/Firmware ICS build: UCALEM
PDA: I747UCALEM
CSC: I747ATTALEM
MODEM: I747UCLEM
Released Date: May 2012
(the original firmware when the Galaxy S3 sold in the U.S market)
Stock ROM Download: http://hotfile.com/dl/166042698/d5b1134/SGH-I747_ATT_I747UCALEM_I747ATTALEM_Original.zip.html
Step 2: Extract the downloaded stock ROM
You need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.
Step 3: Run and Configure Odin
Run Odin downloader Odin3_v3.04 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.
Step 4: Reboot your Galaxy S3 into Download Mode
To reboot the Galaxy S3 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Step 5: Connect your Phone to PC or Laptop
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin.
Step 6: Load the binary .tar.md5 file
Now, you need to just simply click on the PDA button, then browse to the folder where the .tar or .tar.md5 you have previously extracted and then select and load it. Just like this image below, I used the I747UCALG1 stock ROM on this guide, so it came as I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5.
Note: Do not put a ‘PIT’ file.
Step 7: Start Flashing or Installing the stock ROM
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.
Step 8: Watch out for the word PASS!!
When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s to remove it from PC or laptop USB connection
Step 1: Download the needed tools for flashing
Odin Flasher Tool – Odin3_v3.07
http://hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
Samsung Galaxy S3 USB Driver – download (only needed if you haven’t installed the latest Kies on your PC)
http://hotfile.com/dl/167901090/60e906d/ATT_I747_GSIII_Samsung_USB_Driver_v1_4_6_0.exe.html
Grab one of these Samsung Galaxy S3 SGH-I747 Original Stock ROM (or you can check out any latest releases if somehow not included here since there will coming more updates in the future)
Warning! This should not be used on the international version Samsung Galaxy SIII GT-I9300 variants for it may result to unwanted bricks! This works exclusively for U.S SGH-I747 only.
Stock ROM/Firmware ICS build: UCALG1
PDA: I747UCALG1
CSC: I747ATTALG1
MODEM: I747UCLG1
Released Date: July 2012
Stock ROM Download: http://hotfile.com/dl/165022848/0305b1a/SGH-I747_ATT_ICS_4.0.4_I747UCALG1_I747ATTALG1_Original.zip.html
Stock ROM/Firmware ICS build: UCALEM
PDA: I747UCALEM
CSC: I747ATTALEM
MODEM: I747UCLEM
Released Date: May 2012
(the original firmware when the Galaxy S3 sold in the U.S market)
Stock ROM Download: http://hotfile.com/dl/166042698/d5b1134/SGH-I747_ATT_I747UCALEM_I747ATTALEM_Original.zip.html
Step 2: Extract the downloaded stock ROM
You need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.
Step 3: Run and Configure Odin
Run Odin downloader Odin3_v3.04 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.
Step 4: Reboot your Galaxy S3 into Download Mode
To reboot the Galaxy S3 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
Step 5: Connect your Phone to PC or Laptop
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin.
Step 6: Load the binary .tar.md5 file
Now, you need to just simply click on the PDA button, then browse to the folder where the .tar or .tar.md5 you have previously extracted and then select and load it. Just like this image below, I used the I747UCALG1 stock ROM on this guide, so it came as I747UCALG1_I747ATTALG1_I747UCALG1_HOME.tar.md5.
Note: Do not put a ‘PIT’ file.
Step 7: Start Flashing or Installing the stock ROM
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.
Step 8: Watch out for the word PASS!!
When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s to remove it from PC or laptop USB connection
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: SGH-I747 back to Original Factory Stock Firmware
will this work if im on android version 4.1.1 or how to downgrade im using am shg -747
baseband I747UCDLK3
build JRO03L.I747UCDLK3
please let me know
baseband I747UCDLK3
build JRO03L.I747UCDLK3
please let me know
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
Re: SGH-I747 back to Original Factory Stock Firmware
yes it works no matter what version of software you have. why you using 4.1.1. I use the liquid smooth 2.4 with BWM 3.4. works great even clocked at 1.83 Ghz
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: SGH-I747 back to Original Factory Stock Firmware
it was stock firmware its not rooted
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
Re: SGH-I747 back to Original Factory Stock Firmware
yes it is stock rom unrooted. that's what stock rom is. I have not ever seen a custom rom unrooted.
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: SGH-I747 back to Original Factory Stock Firmware
flashing now 537 pm hopefully it will work
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
Re: SGH-I747 back to Original Factory Stock Firmware
phone is stuck on the samsung screen ,it did not work
i did everything as the post said
i did everything as the post said
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
Re: SGH-I747 back to Original Factory Stock Firmware
still not booting up
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
Re: SGH-I747 back to Original Factory Stock Firmware
did it flash correct with ou8t any issue? Do you still have CWM installed on it? You may have updated the boot loader past LK3 which makes problems getting it back before LK3. Why you trying to get back to stock anyway.
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: SGH-I747 back to Original Factory Stock Firmware
Normally you get stuck at the black screen is because of kernel and bootlader can keep it from loading up. Are you trying to speed it up? I been using liquid smooth 4.2.2 for a while now and it works great. I will do some research to see what we can do to help
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: SGH-I747 back to Original Factory Stock Firmware
well tried it but still no go sucks,couldnt go back to ice cream but was able to go back to jelly bean
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
Re: SGH-I747 back to Original Factory Stock Firmware
Just curious, is there some function your looking for that was on the stock ICS that you don't have in JB? If it is apps that is no longer used, you can get those back. If it is flash, you can install flash 11. I use flash and it works great on 4.2.2.
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: SGH-I747 back to Original Factory Stock Firmware
Just curious, is there some function your looking for that was on the stock ICS that you don't have in JB? If it is apps that is no longer used, you can get those back. If it is flash, you can install flash 11. I use flash and it works great on 4.2.2.
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Re: SGH-I747 back to Original Factory Stock Firmware
i love the calendar in one of the ice cream builds
skylinegtr- Member
- Posts : 8
Join date : 2013-05-21
Re: SGH-I747 back to Original Factory Stock Firmware
you should be able to get that in newer build. you may have to save that apk and install on newer rom
vitha- Senior Member
- Posts : 373
Join date : 2012-10-28
Similar topics
» EZ Rooting Galaxy S3 SGH-I747
» Latest STOCK ROMS for AT&T SGS3 (SGH-I747)
» Galaxy S3 I747 4.1.1 Att I747UCDLK3
» CyanogenMod 10 Nightly SGH-I747
» Iphone 2G Custom firmware
» Latest STOCK ROMS for AT&T SGS3 (SGH-I747)
» Galaxy S3 I747 4.1.1 Att I747UCDLK3
» CyanogenMod 10 Nightly SGH-I747
» Iphone 2G Custom firmware
Think Out of the Box with Vitha.Us ... Customising and Modding :: Android :: Rom's :: Galaxy S3 i747
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|