Max M9 v2 - ClockWorkMod v6.0.3.1

View previous topic View next topic Go down

Max M9 v2 - ClockWorkMod v6.0.3.1

Post by vitha on Tue May 21, 2013 11:16 pm

IMPORTANT: This is a touch recovery and does contain a bug The menu disappears just press and hold on screen and move up or down as if you were scrolling and menu will reappear. be very careful not just to touch when no menu is displayed as it will action whatever option you would have touched if you could see the menu.

Installation
Download includes flashtool, recovery (original & CWM), and drivers

1. Run RKAndroidTool.exe

2. Enter flashmode on your tablet.
From Powered Off Pres & hold esc button while inserting USB keep holding esc button and press and hold power button until RKAT says loader mode.

3. Click Run
Tab should reboot and start as normal to Android OS

4. Install a Terminal App to Rooted Tab

5. In Terminal App Enter su reboot recovery

Note: I know it has been stated that there is no button combo to enter recovery on the M9 but I think it may be a timing trick with the buttons as I'm sure I did it by accident but have not been able to replicate thus far.


This does need some proper testing and all comments are welcome


Downloads

mediafire.com ?c52pyqk7m5va53g
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: Max M9 v2 - ClockWorkMod v6.0.3.1

Post by vitha on Tue May 21, 2013 11:18 pm

You may need to change the address where the recovery has been flashed to. In the area just to the right of the checkbox is an address 00010000. Try changing this value to 00014000 and then flash recovery again.

Reboot recovery again. You should get CWM menu with one or the other address.
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: Max M9 v2 - ClockWorkMod v6.0.3.1

Post by pebrey on Sun Jun 16, 2013 6:21 pm

Hi, I have loaded the "Update#79 20130516 4.2.2 V2 multi feature bug fixed" rom, and when trying to reboot into recovery got the dead android. I Then tried loading this as per your instructions - tried both addresses, and still get the problem. Interestingly, I was booting to recovery using an app from the store, rather then terminal. If I use a terminal and "su reboot recovery" I get "Segmentation fault", and no reboot.

Any help would be much appreciated.

Thanks in advance....

pebrey
New Member
New Member

Posts : 1
Join date : 2013-06-16

Back to top Go down

Re: Max M9 v2 - ClockWorkMod v6.0.3.1

Post by vitha on Sun Jun 16, 2013 9:19 pm

Check this one out http://vitha.forumotion.com/t128-cwm-based-recovery-for-pipo-m9#211

I forgot if you getting a dead android you might have flashed to wrong location, Parameter states 0x00014000 . Nan changed location on newer firmware
avatar
vitha
Senior Member
Senior Member

Posts : 373
Join date : 2012-10-28

Back to top Go down

Re: Max M9 v2 - ClockWorkMod v6.0.3.1

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum